All products
Cords and Accessories
Featured
Mini Smoke Extractor
Pyro Studio
Pyrographic Burners
Pyrography Books
Scale Tips - Blunt Outline
Scale Tips - Clark Schreibeis
Scale Tips - Lateral Line
Scale Tips - Raised Full
Scale Tips - Raised Half
Scale Tips - Realistic Full
Scale Tips - Sharp Outline
Scale Tips - Snake
Sets - Pens and Tips
Tips - Bead Making
Tips - Cutting
Tips - Feather Formers
Tips - Jeweller's Wax
Tips - Shading
Tips - Shaft and Split Making
Tips - Sharp Fine Lines
Tips - Sharp Wide Detail lines
Tips - Special/General Purpose
Tips - Stamping (Branding)
Tips - Steel Blanks
Tips - Wax Writing (Pysanky)
Tips - Writing and Ball Stylus
Z530 Dust Collector

4" Inlet Hose Adapter for Razaire Z530
$48.50
The 4 inch Inlet Hose Adapter allows attachment of other accessories including the lap-top tray ZA440. It can be used to collect dust from shop tools like bandsaws, sanders, etc. Requires 4 inch flexible vent hose (available at hardware stores).

90 deg. Exhaust Deflector for Razaire Z530
$17.50
Exhaust air discharges from the side of the Razaire 530. This adapter slips down over the exhaust, re-directing the air towards the back of the unit. Useful in classes, but itʼs also great to re-direct air in many other situations e.g. when using your Razaire 530 beside a tabletop sander or scrollsaw. It is also recommended that you use this deflector when using a Razaire 530 without the front hood.

Activated Charcoal 30% efficient (gray) filter - Razaire Z530
$28.75
Activated Charcoal Standard 30% Efficient (gray) filter. Most often used as a second stage to reduce many odours like burning wood, antler and eggshell. Recommended as a second stage as it will require frequent replacement if used alone. Note: This filter does not eliminate odours. It has proven effective in reducing airborne odours and works best at low fan speed settings.
About Razaire™ filters. There are 4 different filters available for the Razaire™ Z530. While they work fine as single stage filters, they are best used in pairs (stacked). Adding an extra filter stage increases both the performance and the life of the filter, with little to no discernible drop in suction. All filters are approximately 9.75" x 10.5" x 2".

Adapter, RCA(F) to RCA(F)
$5.00
Adapts Optima, Colwood or Nibs pens to a Razertip standard cord (CORD1FL, CORD1HD, CORD7FL, CORD7HD).

Adapter, RCA(M) to 1/4"(F)
$6.75
Adapts Detail Master or similar pen (1/4" phone plug) to a Razertip power supply.

Adapter, RCA(M) to RCA(M)
$6.00
Adapts Razertip pens to Colwood, Nibs, Optima or Burn Master burners.

Ball Stylus - 10 piece Tip Set
$64.60
This larger set includes all 10 tips; the 5 from the # SET99X5 plus 0.4mm(1/64"); 0.8mm(1/32"); 1.2mm(3/64"); 1.5mm(1/16"); 2.0mm(5/64"); 2.3mm(3/32"); 3.0mm(1/8"); 3.9mm(5/32"); 4.7mm(3/16"); and 5.5mm(7/32") tips.
Chrome steel balls welded onto the end of the tip gives excellent heat retention (better as the ball is bigger). The polished ball ends are buttery-smooth to write and draw with. Line widths are consistent and repeatable in all directions. Our 1/64" (0.4mm) ball tip is the smallest in the world.Will only work with the Binding-Post Interchangeable-tip Pen #BPH. Use of heavy duty cord is recommended. Razertip's brass brush is perfect for cleaning these tips.

Ball Stylus - 5 piece Tip Set
$24.15
This ball tip set of 5 includes 0.8mm(1/32"); 1.2mm(3/64"); 1.5mm(1/16"); 2.0mm(5/64"); and 2.3mm(3/32") tips.
Chrome steel balls welded onto the end of the tip gives excellent heat retention (better as the ball is bigger). The polished ball ends are buttery-smooth to write and draw with. Line widths are consistent and repeatable in all directions.Will only work with the Binding-Post Interchangeable-tip Pen #BPH. Use of heavy duty cord is recommended. Razertip's brass brush is perfect for cleaning these tips..

Bead Maker - 3 Piece Pen Set
$95.30
Includes 3.0mm (7/64"), 4.7mm (3/16") and 6.00mm (15/64") standard pens.Used to "push" material down, leaving a round raised "bead" on any surface, but very popular on gourds and wood turnings. Each depression makes half a bead.HD cord is recommended. Use our brass brush for cleaning these tips.
Available as: Standard pen and standard tip only.

Bead Maker - 3 Piece Tip Set
$27.85
Includes 3.0mm (7/64"), 4.7mm (3/16") and 6.00mm (15/64") tips.Used to "push" material down, leaving a round raised "bead" on any surface, but very popular on gourds and wood turnings. Each depression makes half a bead.Will only work with the Binding-Post Interchangeable-tip Pen #BPH.HD cord is recommended. Use our brass brush for cleaning these tips.
Available as: Standard pen and standard tip only.

Bird Carver's Heavy-Duty Tips - 8 piece Tip Set
$39.40
Contains 8 of our most popular birdcarver heavy duty tips.For use with our Binding-Post Interchangeable-tip Pen #BPH.TH1S - Heavy Duty Small Skew. General use tip for pyrography, cutting, fine detail. A very versatile tip, especially for small work.TH2M - Heavy Duty Medium Round, general pyrography. General pyrography, fine detail on flat or medium concave surfaces.TH4M - Heavy Duty Medium Flat Skew. Medium flat skew for general detail work. Allows you to work more directly above your work than if using the #T1M.TH5M - Heavy Duty Medium Spear. Popular for general pyrography, feather and hair detailing and embellishing or decorating wood turnings.TH6M - Heavy Duty Small Round Skew. Used for extreme fine detail in confined areas. Great for fine detail on feathers or hair on sculpted or "bumped" surfaces. Popular with more advanced bird and animal carvers.TH7L - Heavy Duty Large Round Skew. General detail work. Great for fine detail on feathers or hair on sculpted or "bumped" surfaces. Popular with more advanced bird and animal carvers.TH8 - Heavy Duty Burnisher. For burnishing. Also for fine, wrinkle-like details on wood, paper, etc. Useful for wrinkles on duck bills.TH9 - Heavy Duty Writing. Standard writing tip, used much like a ball-point pen for writing, signing. Yields line approx. 1/32 - 1/16 inch wide, depending on heat setting and material.

Bird Carver's Micro Heavy-Duty Tips - 5 piece Tip Set
$26.25
Heavy Duty Bird Carver's Micro Tips - 5 piece set. Contains 5 of our smallest fine detail tips - Small Skew #1S, Small Round #2S, Small Spear #5S, Small Chisel #6S and Small Round Skew #7S.
T1S - Heavy Duty Small Skew. General use tip for pyrography, cutting, fine detail. A very versatile tip, especially for small work.
T2S - Heavy Duty Small Round, general pyrography. Very fine detail on small, concave surfaces. Great for detailing sculpted feathers and for "burning for color" techniques.
T5S - Heavy Duty Small Spear. Ideal for miniatures and very fine detail in pyrography. Unique to Razertip.
T6S - Heavy Duty Small Chisel. Useful for detailing where lines must be terminated at both ends. Works for some small shading, calligraphy, and general pyrography work.
T7S - Heavy Duty Small Round Skew. Used for extreme fine detail in confined areas. Great for fine detail on feathers or hair on sculpted or "bumped" surfaces. Popular with more advanced bird and animal carvers.
Use with the Binding-Post Interchangeable-tip Pen #BPH.

Bird Carver's Micro Tips - 5 piece Tip Set
$24.15
Bird Carver's Micro Tips - 5 piece Set. Contains 5 of our smallest fine detail tips - Small Skew #1S, Small Round #2S, Small Spear #5S, Small Chisel #6S and Small Round Skew #7S.
T1S - General use tip for pyrography, cutting, fine detail. A very versatile tip, especially for small work.
T2S - Small Round, general pyrography. Very fine detail on small, concave surfaces. Great for detailing sculpted feathers and for "burning for color" techniques.
T5S - Small Spear. Ideal for miniatures and very fine detail in pyrography. Unique to Razertip.
T6S - Small Chisel. Useful for detailing where lines must be terminated at both ends. Works for some small shading, calligraphy, and general pyrography work.
T7S - Small Round Skew. Used for extreme fine detail in confined areas. Great for fine detail on feathers or hair on sculpted or "bumped" surfaces. Popular with more advanced bird and animal carvers.
Use with the Binding-Post Interchangeable-tip Pen #BPH.

Bird Carver's Tips - 8 piece Tip Set
$35.70
Contains 8 of our most popular birdcarver tips.Use with our Binding-Post Interchangeable-tip Pen #BPH.T1S - Small Skew. General use tip for pyrography, cutting, fine detail. A very versatile tip, especially for small work.T2M - Medium Round, general pyrography. General pyrography, fine detail on flat or medium concave surfaces.T4M - Medium Flat Skew. Medium flat skew for general detail work. Allows you to work more directly above your work than if using the #T1M.T5M - Medium Spear. Popular for general pyrography, feather and hair detailing and embellishing or decorating wood turnings.T6M - Small Round Skew. Used for extreme fine detail in confined areas. Great for fine detail on feathers or hair on sculpted or "bumped" surfaces. Popular with more advanced bird and animal carvers.T7L - Large Round Skew. General detail work. Great for fine detail on feathers or hair on sculpted or "bumped" surfaces. Popular with more advanced bird and animal carvers.T8 - Burnisher. For burnishing. Also for fine, wrinkle-like details on wood, paper, etc. Useful for wrinkles on duck bills.T9 - Writing. Standard writing tip, used much like a ball-point pen for writing, signing. Yields line approx. 1/32 - 1/16 inch wide, depending on heat setting and material.

Black ID Ring for Razertip Pens
$0.25
Several of our customers have suggested that we provide a simple way for them to quickly tell one pen from the other without having to pick it up and look carefully at the tip. These "O"-rings are the solution. They can be rolled onto the pen body (just behind the grip is a good place) in any combination to quickly ID different pens by the ring colours.
Also helpful to distinguish your pens from others in classes or workshops. They are re-usable and will fit standard or HD pens.

Blue ID Ring for Razertip Pens
$0.25
Several of our customers have suggested that we provide a simple way for them to quickly tell one pen from the other without having to pick it up and look carefully at the tip. These "O"-rings are the solution. They can be rolled onto the pen body (just behind the grip is a good place) in any combination to quickly ID different pens by the ring colours.
Also helpful to distinguish your pens from others in classes or workshops. They are re-usable and will fit standard or HD pens.

BPH Interchangeable-tip Pen
$36.25
The best interchangeable-tip pen in the world! The Razertip BPH allows you to use wire tips on your Razertip® burner. The Stainless steel screw and plates will allow you to fasten tips securely, assuring excellent electrical and mechanical contact. Before the Razertip BPH, it was a compromise: there was either a wire-and-tube system, or you had to buy an expensive tip with a special molded plug that was not rigid enough for precision work and the tips often required considerable force to remove.
Great for trying new tips, tip sets, or for those special tips that you may not use very often. It can be convenient to have several BPH pens with tips installed to save time switching tips while working on projects. The BPH lets you install two tips at once for parallel lines or faster texturing (higher heat setting required and a heavy-duty cord is recommended when using 2 tips). Plain wire is available to create your own custom tips as well.
The BPH is cool on your fingers, and it's built to last a lifetime.

Burn-through Transfer Paper - 100 Sheets
$39.95
Easily and Accurately Transfer Patterns to Your Work Surface.
100 SHEETS – 8.5" x 11"
Easy to use:
Trace, draw or print your pattern onto Transfer Paper
Compatible with both inkjet and laser printers.
Cut out pattern as required.
Tape Transfer Paper to your work surface with masking tape.
Burn through the Transfer Paper (variable temperature burning tool at low heat setting is recommended).
Remove pattern and continue with shading or detail as desired.
Hints:
To get the most from each sheet, print or copy a full sheet of patterns, or multiple patterns before cutting patterns out. Scraps can be saved for tracing.
If you're working on a round surface, cut pattern into sections or create small slits along pattern edges so the pattern conforms to your surface.
Locate the masking tape in places where you won’t be burning through it.
Don't burn too dark at first - you can darken the initial burn later.

Burn-through Transfer Paper - 15 Sheets
$9.95
Easily and Accurately Transfer Patterns to Your Work Surface.
15 SHEETS – 8.5" x 11"
Easy to use:
Trace, draw or print your pattern onto Transfer Paper
Compatible with both inkjet and laser printers.
Cut out pattern as required.
Tape Transfer Paper to your work surface with masking tape.
Burn through the Transfer Paper (variable temperature pyro burning tool at low heat setting is recommended).
Remove pattern and continue with shading or detail as desired.
Hints:
To get the most from each sheet, print or copy a full sheet of patterns, or multiple patterns before cutting patterns out. Scraps can be saved for tracing.
If you're working on a round surface, cut pattern into sections or create small slits along pattern edges so the pattern conforms to your surface.
Locate the masking tape in places where you won’t be burning through it.
Don't burn too dark at first - you can darken the initial burn later.

Cable Clips (2) for Tower Mount System
$4.00
Replacement cable clips for use on Tower Mount System arms to help manage power cables - Set of 2.

Carving - 4 Pen Pack from KIT01
$124.70
The Carving 4 pen pack includes the pens from the Carving starter kits, they are most useful for bird and animal carvers. This package consists of:
1 x #F1L - Large Skew standard pen
1 x #F5S - Small Spear standard pen
1 x #F7S - Small Round Skew standard pen
1 x #HD5MC - Quill Maker heavy duty pen