Razaire Mini - X60 Smoke Extractor
Razaire Mini - X60 Smoke Extractor $89.95
Keep your pyrography workspace fresh and clear of smoke with the Razaire™ MINI - X60 Smoke Extractor. With multi-stage carbon filtration and a versatile design the Razaire™ MINI works in most settings and with any project. The soft Hood Grip allows the Razaire™ MINI to be used on top of your project to ensure maximum smoke capture and filtration. The unit can still be used as a fan to draw air away from your burning surface even if the filters are removed or no longer effective. You can increase the filtering efficiency of the Razaire™ MINI by adding one or more Primary Filter Expansion Kits (# XF200). Sold separately. Each kit includes an Expansion Frame and a new Primary Filter. Multi-Stage Carbon Filtration 2-Speed Operation Replaceable Filters Filter stages can be added with the Expansion Kit Can be used vertically or horizontally Mount to a compatible support for more flexibility Clear Hood can be removed for versatility Removable soft rubber Hood Grip Warranty: 3 Years Size: 5" x 5" x 6" (13 cm x 13 cm x 15 cm) Weight: 15.2 oz / 430 g
Razaire Mini - X60 Primary Filter Expansion Kit
Razaire Mini - X60 Primary Filter Expansion Kit $18.95
You can increase the filtering efficiency of the Razaire™ MINI by adding one or more Primary Filter Expansion Kits (# XF200). Each kit includes an Expansion Frame and a new Primary Filter. No tools required. To install simply remove the Top Cap from the unit and snap in the Expansion Frame. The extra filter can be set directly on top of the existing filter (be sure to remove the protective paper tabs from the new filter first). Snap the Top Cap back in place. You can add as many extra Primary Filter stages as you want, however air flow through the unit will be reduced slightly with each additional filter stage you add. Note: You cannot add extra Pre-filters to the Razaire™ MINI.
Razaire Mini - X60 Primary Filter
Razaire Mini - X60 Primary Filter $10.95
The Razaire MINI can still be used as a fan to draw air away from your burning surface even if the filters are removed or no longer effective. The Primary Filter should be replaced every other time you replace the Prefilter. This works out to roughly 50-100 hours between Primary Filter changes. This is a basic guideline only. You may find that you want (or need) to replace filters more frequently or less frequently, depending on how effective you feel the filter is at removing smoke while you are burning.
Razaire Mini - X60 Pre-filter
Razaire Mini - X60 Pre-filter $5.95
For the most effective smoke reduction replace filters regularly. Recommended replacement interval for the Pre-filter is approximately every 25-50 hours of burning if you burn hot and generate lots of smoke, and approximately every 50 hours if you burn more moderately.
Tower Mount System TWR-1
Tower Mount System TWR-1 $89.95
The Tower Mount System TWR-1 is an out of the box solution to get the Razaire Mini - X60 Smoke Extractor airborne. Rigid telescoping tower extends to 20" 20" articulating arm with single knob control Durable silicone cushions Cable Clips (2) Adjustable table clamp fits surfaces 1/2" - 3" thickness
Tower Mount System FLX-1
Tower Mount System FLX-1 $69.95
20" articulating arm with single knob control Durable silicone cushions Adjustable table clamp fits surfaces 1/2" - 3" thickness Cable Clips (2)
Tower Mount System FLX-2
Tower Mount System FLX-2 $64.95
For use with TWR-1 20" articulating arm with single knob control Tower clamp with 1 1/2" jaw Durable silicone cushions Cable Clips (2) 1/4" thread for attaching accessories
Tower Clamp Silicone Cushion Set - Ocean
Tower Clamp Silicone Cushion Set - Ocean $4.00
Replacement tower clamp cushion set for TWR-1 or FLX-2 arm.
Table Clamp Silicone Cushion - Ocean
Table Clamp Silicone Cushion - Ocean $4.00
Replacement table clamp cushion TWR-1 or FLX-1.
Tower Clamp Silicone Cushion Set - Coral
Tower Clamp Silicone Cushion Set - Coral $4.00
Replacement tower clamp cushion set for TWR-1 or FLX-2 arm.
Table Clamp Silicone Cushion - Coral
Table Clamp Silicone Cushion - Coral $4.00
Replacement table clamp cushion TWR-1 or FLX-1.
Tower Clamp Silicone Cushion Set - Black
Tower Clamp Silicone Cushion Set - Black $4.00
Replacement tower clamp cushion set for TWR-1 or FLX-2 arm.
Table Clamp Silicone Cushion - Black
Table Clamp Silicone Cushion - Black $4.00
Replacement table clamp cushion TWR-1 or FLX-1.
Cable Clips (2) for Tower Mount System
Cable Clips (2) for Tower Mount System $4.00
Replacement cable clips for use on Tower Mount System arms to help manage power cables - Set of 2.