Dust Collector, Razaire 530
Dust Collector, Razaire 530 $495.00
The Razertip Razaire Z530 dust collector is a quiet, ultra-efficient, portable, modular dust management system. It comes with a 2 inch standard filter, filter frame and 8 inch hood. Collects dust at the source (rotary carving tools, belt sanders, etc.) to overall shop air filtration. The supplied standard 2" filter is easily removed for cleaning (filter is cleaned by tapping it into a plastic bag or a garbage can). It can be cleaned many times before replacement is necessary. The Flameproof ABS cabinet has a built-in lamp holder that accepts a standard swing-arm lamp (not included), giving you excellent light where you need it most - right at the intake. Also supplied with an 8 inch acrylic hood that breaks down into 3 flat panels for portability. Several accessories can be added to increase the versatility of this system - everything from adding higher efficiency filters or extra filter stages (for increased efficiency) to a 4" hose adapter, a lap-top tray, a motor tool hanger, and a deflector to direct the air towards the back.    120 Volts AC, 60Hz. Safety certified for Canada and the United States.
90 deg. Exhaust Deflector for Razaire Z530
90 deg. Exhaust Deflector for Razaire Z530 $17.50
Exhaust air discharges from the side of the Razaire 530. This adapter slips down over the exhaust, re-directing the air towards the back of the unit. Useful in classes, but itʼs also great to re-direct air in many other situations e.g. when using your Razaire 530 beside a tabletop sander or scrollsaw. It is also recommended that you use this deflector when using a Razaire 530 without the front hood.
4
4" Inlet Hose Adapter for Razaire Z530 $48.50
The 4 inch Inlet Hose Adapter allows attachment of other accessories including the lap-top tray ZA440. It can be used to collect dust from shop tools like bandsaws, sanders, etc. Requires 4 inch flexible vent hose (available at hardware stores).
Lap Tray for Razaire 530
Lap Tray for Razaire 530 $39.25
This very comfortable tray was designed so that you can carve right in your lap. Requires use of the 4" hose adapter and a length of 4 inch flexible vent hose (available at hardware stores). But it is much more than just a lap tray. Stand it on edge and it excels at picking up dust from small stationary belt sanders and small grinders. The built-in lips are not only comfortable to rest your arms on, they can also be used to fashion the lap tray into a drawer that conveniently stores away under your desk or bench. Approximately 13"x17"x2" deep.
Motor Tool Hanger for Razaire Z530
Motor Tool Hanger for Razaire Z530 $21.25
The Razertip Motor Tool Hanger allows you to hang your Foredom or Dremel flex-shaft tool from the Razaire Z530. Fits over the "T" rail on either the left or right side.
Filter Frame 2
Filter Frame 2" for Razaire Z530 $17.00
Extra 2" filter frame for Z530. Infinitely stackable. Use this frame to add a second or third filter stage to your Razaire 530 dust collector. Snaps into existing frame quickly without any tools necessary.
Standard 30% efficient (green) filter - Razaire Z530
Standard 30% efficient (green) filter - Razaire Z530 $21.25
Standard 30% efficient (green) filter. Best for general wood dust applications, or as the first (front) stage when using higher efficiency filters. It is the easiest to clean and the longest lasting. Superb in pairs! Better performance and longer life can be achieved by "stacking" two ZF20's (#ZH1002 filter frame required). About Razaire™ filters. There are 4 different filters available for the Razaire™ Z530. While they work fine as single stage filters, they are best used in pairs (stacked). Adding an extra filter stage increases both the performance and the life of the filter, with little to no discernible drop in suction. All filters are approximately 9.75" x 10.5" x 2".
Medium 60% efficient filter - Razaire Z530
Medium 60% efficient filter - Razaire Z530 $26.00
Medium 60% efficient filter. A good choice for the second stage, especially when collecting antler or bone particles. Easily cleanable and fairly long lasting. Best used as a second (rear) stage behind a standard filter. About Razaire™ filters. There are 4 different filters available for the Razaire™ Z530. While they work fine as single stage filters, they are best used in pairs (stacked). Adding an extra filter stage increases both the performance and the life of the filter, with little to no discernible drop in suction. All filters are approximately 9.75" x 10.5" x 2".
High 80% efficient filter - Razaire Z530
High 80% efficient filter - Razaire Z530 $37.00
High 80% efficient filter. Our most efficient filter; best used for hard to capture particles like soapstone and eggshell. Also good for maximum efficiency when a single stage is desirable. Because of the fine weave of this filter it is not as easily cleaned as the others and will require more frequent replacement. For best results we recommend using it as a second stage with a standard filter in front. About Razaire™ filters. There are 4 different filters available for the Razaire™ Z530. While they work fine as single stage filters, they are best used in pairs (stacked). Adding an extra filter stage increases both the performance and the life of the filter, with little to no discernible drop in suction. All filters are approximately 9.75" x 10.5" x 2".
Activated Charcoal 30% efficient (gray) filter - Razaire Z530
Activated Charcoal 30% efficient (gray) filter - Razaire Z530 $28.75
Activated Charcoal Standard 30% Efficient (gray) filter. Most often used as a second stage to reduce many odours like burning wood, antler and eggshell. Recommended as a second stage as it will require frequent replacement if used alone. Note: This filter does not eliminate odours. It has proven effective in reducing airborne odours and works best at low fan speed settings. About Razaire™ filters. There are 4 different filters available for the Razaire™ Z530. While they work fine as single stage filters, they are best used in pairs (stacked). Adding an extra filter stage increases both the performance and the life of the filter, with little to no discernible drop in suction. All filters are approximately 9.75" x 10.5" x 2".